Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1315
AD NO.
2021-0228
SUBJECT
ATA 57 – Wings – Centre and Outer Wing Box Lower Panels / Stiffeners – Inspection
APPLICABILITY
A318, A319, A320 and A321 aeroplanes
ISSUED BY
EASA
AD NO.
2021-0227
SUBJECT
ATA 53 – Fuselage – Double Joggle Area Frame 16 and Frame 20 – Inspection / Modification
APPLICABILITY
A318, A319, A320 and A321 aeroplanes
ISSUED BY
EASA
AD NO.
2021-0226
SUBJECT
ATA 53 – Fuselage – Rear Cone Frame Feet 102/103 – Modification
APPLICABILITY
A380 aeroplanes
ISSUED BY
EASA
AD NO.
2021-0194R1
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section – Amendment
APPLICABILITY
AS 350 and EC 130 helicopters
ISSUED BY
EASA
AD NO.
2016-0105R2
SUBJECT
ATA 53 – Fuselage – Cabin Floor Beam Junction – Inspection
APPLICABILITY
A321 aeroplanes
ISSUED BY
EASA
AD NO.
2015-0036R4
SUBJECT
ATA 53 – Fuselage – External Skin Repairs – Inspection
APPLICABILITY
A318, A319, A320 and A321 aeroplanes
ISSUED BY
EASA
AD NO.
2016-0106R2
SUBJECT
ATA 53 – Fuselage – Frame 35.2A – Inspection
APPLICABILITY
A321 aeroplanes
ISSUED BY
EASA
AD NO.
2021-19-13
SUBJECT
Air Transport Association (ATA) of America Code 34, Navigation.
APPLICABILITY
ATR42-500 and ATR72-212A airplanes
ISSUED BY
FAA
AD NO.
CF-2009-29R4
SUBJECT
ATA 32 – Nose Landing Gear – Loss of Pivot Pin Retention Bolt
APPLICABILITY
DHC-8-401 and -402 aeroplanes
ISSUED BY
TCCA
AD NO.
2021-0221
SUBJECT
ATA 21 – Air Conditioning – Belly Fairing Air Cooling Pack Discharge Duct Adjustable Rods – Replacement ATA 24 – Electrical Power – Generator and Ground Power Control Unit – Replacement / Software Update ATA 25 – Equipment / Furnishings – Modified Door Lining Panels – Installation ATA 28 – Fuel – Refuel Diffusers / Engine Feed Fuel Pipe End Fittings – Replacement ATA 53 – Fuselage – Nose Landing Gear Bay Bulkhead Panel – Inspection ATA 71 – Powerplant – Redesigned Fan Cowl Latch Access Panels – Installation
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, manufacturer serial numbers (MSN) 0006, 0008, 0009, 0011, 0014 to 0017 inclusive, 0020, 0022, 0023, 0025, 0027, 0029, 0033, 0034, 0038 to 0041 inclusive, 0043, 0044, 0048 to 0051 inclusive, 0056, 0058, 0059, 0061, 0062, 0063, 0067, 0069, 0070, 0072, 0074, 0078, 0080, 0081, 0082, 0084, 0086, 0087, 0089, 0094, 0099, 0100, 0111, 0117, 0125, 0131, 0137, 0142, 0143, 0145, 0146, 0150, 0153, 0154, 0157 to 0160 inclusive, 0164, 0165, 0166, 0168 to 0172 inclusive, 0174 to 0184 inclusive, 0186 to 0192 inclusive, 0194, 0195, 0198, 0200 to 0208 inclusive, 0230 and 0231.
ISSUED BY
EASA
AD NO.
2021-0220
SUBJECT
ATA 27 – Flight Controls – Drive Struts on Flap Tracks 1 and 2 – Inspection / Replacement
APPLICABILITY
Airbus A350-941 and A350-1041 aeroplanes, manufacturer serial numbers (MSN) 0042, 0050, 0060, 0064, 0066, 0091, 0141, 0157, 0159, 0164, 0209, 0210, 0213, 0260 and 0265.
ISSUED BY
EASA
AD NO.
2021-0219
SUBJECT
ATA 32 – Landing Gear – Wing / Body Landing Gear Retraction Actuators – Modification / Replacement
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| 2021-0228 | ATA 57 – Wings – Centre and Outer Wing Box Lower Panels / Stiffeners – Inspection | A318, A319, A320 and A321 aeroplanes |
EASA
|
| 2021-0227 | ATA 53 – Fuselage – Double Joggle Area Frame 16 and Frame 20 – Inspection / Modification | A318, A319, A320 and A321 aeroplanes |
EASA
|
| 2021-0226 | ATA 53 – Fuselage – Rear Cone Frame Feet 102/103 – Modification | A380 aeroplanes |
EASA
|
| 2021-0194R1 | ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section – Amendment | AS 350 and EC 130 helicopters |
EASA
|
| 2016-0105R2 | ATA 53 – Fuselage – Cabin Floor Beam Junction – Inspection | A321 aeroplanes |
EASA
|
| 2015-0036R4 | ATA 53 – Fuselage – External Skin Repairs – Inspection | A318, A319, A320 and A321 aeroplanes |
EASA
|
| 2016-0106R2 | ATA 53 – Fuselage – Frame 35.2A – Inspection | A321 aeroplanes |
EASA
|
| 2021-19-13 | Air Transport Association (ATA) of America Code 34, Navigation. | ATR42-500 and ATR72-212A airplanes |
FAA
|
| CF-2009-29R4 | ATA 32 – Nose Landing Gear – Loss of Pivot Pin Retention Bolt | DHC-8-401 and -402 aeroplanes |
TCCA
|
| 2021-0221 | ATA 21 – Air Conditioning – Belly Fairing Air Cooling Pack Discharge Duct Adjustable Rods – Replacement ATA 24 – Electrical Power – Generator and Ground Power Control Unit – Replacement / Software Update ATA 25 – Equipment / Furnishings – Modified Door Lining Panels – Installation ATA 28 – Fuel – Refuel Diffusers / Engine Feed Fuel Pipe End Fittings – Replacement ATA 53 – Fuselage – Nose Landing Gear Bay Bulkhead Panel – Inspection ATA 71 – Powerplant – Redesigned Fan Cowl Latch Access Panels – Installation | Airbus A380-841, A380-842 and A380-861 aeroplanes, manufacturer serial numbers (MSN) 0006, 0008, 0009, 0011, 0014 to 0017 inclusive, 0020, 0022, 0023, 0025, 0027, 0029, 0033, 0034, 0038 to 0041 inclusive, 0043, 0044, 0048 to 0051 inclusive, 0056, 0058, 0059, 0061, 0062, 0063, 0067, 0069, 0070, 0072, 0074, 0078, 0080, 0081, 0082, 0084, 0086, 0087, 0089, 0094, 0099, 0100, 0111, 0117, 0125, 0131, 0137, 0142, 0143, 0145, 0146, 0150, 0153, 0154, 0157 to 0160 inclusive, 0164, 0165, 0166, 0168 to 0172 inclusive, 0174 to 0184 inclusive, 0186 to 0192 inclusive, 0194, 0195, 0198, 0200 to 0208 inclusive, 0230 and 0231. |
EASA
|
| 2021-0220 | ATA 27 – Flight Controls – Drive Struts on Flap Tracks 1 and 2 – Inspection / Replacement | Airbus A350-941 and A350-1041 aeroplanes, manufacturer serial numbers (MSN) 0042, 0050, 0060, 0064, 0066, 0091, 0141, 0157, 0159, 0164, 0209, 0210, 0213, 0260 and 0265. |
EASA
|
| 2021-0219 | ATA 32 – Landing Gear – Wing / Body Landing Gear Retraction Actuators – Modification / Replacement | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers. |
EASA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |