Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1090
AD NO.
2022-22-12
SUBJECT
Joint Aircraft System Component (JASC) Code: 3222, Nose/Tail Landing Gear Structure/Axle.
APPLICABILITY
Bell Textron Inc., Model 204B,205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters; certain Erickson 214 Holdings, LLC,Model 214B and 214B-1 helicopters; certain Leonardo S.p.a. Model AB412 and AB412 EP helicopters
ISSUED BY
FAA
AD NO.
2022‐0217
SUBJECT
ATA 29 – Hydraulic Power – Nose Landing Gear Pressure Return Lines – Replacement
APPLICABILITY
Airbus A350‐941 and A350‐1041 aeroplanes, all manufacturer serial numbers (MSN).
ISSUED BY
EASA
AD NO.
2021-0092R1
SUBJECT
ATA 36 – Pneumatic – Cross-Bleed Ducts – Inspection / Replacement
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
CF-2022-59
SUBJECT
Maintenance Requirements Manual (MRM), Part 2 Airworthiness Limitation Items (ALI) – Introduction of New Section 7-00 – Candidate Certification Maintenance Requirements (CCMR) Limitations
APPLICABILITY
De Havilland Aircraft of Canada Limited (formerly Bombardier Inc.) model DHC-8-401 and -402 aeroplanes, all serial numbers
ISSUED BY
Transport Canada
AD NO.
2013-0104R2
SUBJECT
ATA 27 – Flight Controls – Flap Actuator – Inspection / Replacement
APPLICABILITY
TBM 700 aeroplanes, all manufacturer serial numbers, except those on which DAHER modification (MOD) 70-0777-27 has been embodied in production.
ISSUED BY
EASA
AD NO.
2022-21-05
SUBJECT
Air Transport Association (ATA) of America Code 22, Auto flight
APPLICABILITY
This AD applies to The Boeing Company Model 737-300, -400, and -500 series airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin 737-22A1411 RB, dated August 22, 2022.
ISSUED BY
FAA
AD NO.
2022-0215
SUBJECT
ATA 72 – Engine – Bearing Spring Finger Housing – Inspection
APPLICABILITY
LEAP-1B21, LEAP-1B23, LEAP-1B25, LEAP-1B27, LEAP-1B28, LEAP-1B28B1, LEAP-1B28B2, LEAP-1B28B2C, LEAP-1B28B3, LEAP-1B28BBJ1 and LEAP-1B28BBJ2 engines, all serial numbers (s/n). These engines are known to be installed on, but not limited to, Boeing 737-8, 737-8200 and 737-9 aeroplanes.
ISSUED BY
EASA
AD NO.
2022-0213
SUBJECT
ATA 52 – Doors – Passenger Door / External Handle Mechanism – Cleaning / Lubrication
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers (MSN)
ISSUED BY
EASA
AD NO.
2022-0210
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Time Limits Manual / Maintenance Programme – Amendment
APPLICABILITY
Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all serial numbers.
ISSUED BY
EASA
AD NO.
2022-0209-E
SUBJECT
ATA 91 – Harness Installation – Forward Roof Area – Inspection
APPLICABILITY
AB139 and AW139 helicopters, serial number (s/n) 31005 to 31984 inclusive (except s/n 31007, 31803, 31959, 31967, 31969, 31974, 31982 and 31983), 41001 to 41580 inclusive, and from 41801 to 41806 inclusive.
ISSUED BY
EASA
AD NO.
2021-0253R1
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Fuel Airworthiness Limitations – ALS Part 5 – Amendment
APPLICABILITY
Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2021-0252R1
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Fuel Airworthiness Limitations – ALS Part 5 – Amendment
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| 2022-22-12 | Joint Aircraft System Component (JASC) Code: 3222, Nose/Tail Landing Gear Structure/Axle. | Bell Textron Inc., Model 204B,205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters; certain Erickson 214 Holdings, LLC,Model 214B and 214B-1 helicopters; certain Leonardo S.p.a. Model AB412 and AB412 EP helicopters |
FAA
|
| 2022‐0217 | ATA 29 – Hydraulic Power – Nose Landing Gear Pressure Return Lines – Replacement | Airbus A350‐941 and A350‐1041 aeroplanes, all manufacturer serial numbers (MSN). |
EASA
|
| 2021-0092R1 | ATA 36 – Pneumatic – Cross-Bleed Ducts – Inspection / Replacement | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers. |
EASA
|
| CF-2022-59 | Maintenance Requirements Manual (MRM), Part 2 Airworthiness Limitation Items (ALI) – Introduction of New Section 7-00 – Candidate Certification Maintenance Requirements (CCMR) Limitations | De Havilland Aircraft of Canada Limited (formerly Bombardier Inc.) model DHC-8-401 and -402 aeroplanes, all serial numbers |
Transport Canada
|
| 2013-0104R2 | ATA 27 – Flight Controls – Flap Actuator – Inspection / Replacement | TBM 700 aeroplanes, all manufacturer serial numbers, except those on which DAHER modification (MOD) 70-0777-27 has been embodied in production. |
EASA
|
| 2022-21-05 | Air Transport Association (ATA) of America Code 22, Auto flight | This AD applies to The Boeing Company Model 737-300, -400, and -500 series airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin 737-22A1411 RB, dated August 22, 2022. |
FAA
|
| 2022-0215 | ATA 72 – Engine – Bearing Spring Finger Housing – Inspection | LEAP-1B21, LEAP-1B23, LEAP-1B25, LEAP-1B27, LEAP-1B28, LEAP-1B28B1, LEAP-1B28B2, LEAP-1B28B2C, LEAP-1B28B3, LEAP-1B28BBJ1 and LEAP-1B28BBJ2 engines, all serial numbers (s/n). These engines are known to be installed on, but not limited to, Boeing 737-8, 737-8200 and 737-9 aeroplanes. |
EASA
|
| 2022-0213 | ATA 52 – Doors – Passenger Door / External Handle Mechanism – Cleaning / Lubrication | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers (MSN) |
EASA
|
| 2022-0210 | ATA 05 – Time Limits / Maintenance Checks – Time Limits Manual / Maintenance Programme – Amendment | Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all serial numbers. |
EASA
|
| 2022-0209-E | ATA 91 – Harness Installation – Forward Roof Area – Inspection | AB139 and AW139 helicopters, serial number (s/n) 31005 to 31984 inclusive (except s/n 31007, 31803, 31959, 31967, 31969, 31974, 31982 and 31983), 41001 to 41580 inclusive, and from 41801 to 41806 inclusive. |
EASA
|
| 2021-0253R1 | ATA 05 – Time Limits / Maintenance Checks – Fuel Airworthiness Limitations – ALS Part 5 – Amendment | Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2021-0252R1 | ATA 05 – Time Limits / Maintenance Checks – Fuel Airworthiness Limitations – ALS Part 5 – Amendment | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers. |
EASA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |