Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1090
AD NO.
2021-0248
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Implementation
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2021-18-17
SUBJECT
This AD required inspecting for part numbers of the operational program software (OPS) of the flight control computers (FCCs) and installing and testing an updated version of the FCC OPS.
APPLICABILITY
This AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and – 900ER series airplanes, certificated in any category.
ISSUED BY
FAA
AD NO.
2021-0254
SUBJECT
ATA 24 – Electrical Power – Ram Air Turbine Gearbox – Inspection / Modification
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial number (MSN).
ISSUED BY
EASA
AD NO.
2021-05-02R1
SUBJECT
Main Rotor System – Airbus Helicopters
APPLICABILITY
Airbus Helicopters, certificated in any category, as identified in paragraphs (c)(1) through (3) of this AD. (1) Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, and AS350D helicopters. (2) Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. (3) Model EC130B4 and EC130T2 helicopters.
ISSUED BY
FAA
AD NO.
2021-0242
SUBJECT
ATA 53 – Fuselage – Door Stop Fitting Holes at Frame 66/68 – Inspection / Repair
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers, except: – aeroplanes on which Airbus modification (mod) 157039 has been embodied in production; – A319 aeroplanes on which mod 28238, mod 28162 and mod 28342 have been embodied in production; and – A318 aeroplanes on which mod 39195 has been embodied in production, or Airbus Service Bulletin (SB) A320-00-1219 has been embodied in service.
ISSUED BY
EASA
AD NO.
2021-0241
SUBJECT
ATA 57 – Wings – Front Spar Vertical Stringers – Inspection
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers (MSN), except those on which Airbus modification (mod) 160000 (structural reinforcement for A319 and A320 sharklet installation) or mod 155946 was implemented in production.
ISSUED BY
EASA
AD NO.
2021-0229
SUBJECT
ATA 57 – Wings – Outer Flaps and Tabs – Identification/ Inspection (Improper Heat Treatment) / Replacement (Wrong Material)
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers (MSN).
ISSUED BY
EASA
AD NO.
2021-0237-E
SUBJECT
ATA 26 – Fire Protection – Engine Fire Handles Snap Wire – Inspection
APPLICABILITY
ATR 42 and ATR 72 aeroplanes
ISSUED BY
EASA
AD NO.
2021-19-19
SUBJECT
Air Transport Association (ATA) of America Code 57, Wings.
APPLICABILITY
This AD applies to The Boeing Company Model 737-9 airplanes, certificated in any category
ISSUED BY
FAA
AD NO.
2021-0236
SUBJECT
ATA 32 – Landing Gear – Landing Gear Sliding Tube – Inspection / Replacement
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2021-0233
SUBJECT
ATA 53 – Fuselage – Bulk Cargo Door Frames – Inspection / Repair
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2021-20-19
SUBJECT
Air Transport Association (ATA) of America Code 28, Fuel
APPLICABILITY
This AD applies to The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes, certificated in any category, having line numbers (L/N) 1 through 1200 inclusive.
ISSUED BY
FAA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| 2021-0248 | ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Implementation | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2021-18-17 | This AD required inspecting for part numbers of the operational program software (OPS) of the flight control computers (FCCs) and installing and testing an updated version of the FCC OPS. | This AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and – 900ER series airplanes, certificated in any category. |
FAA
|
| 2021-0254 | ATA 24 – Electrical Power – Ram Air Turbine Gearbox – Inspection / Modification | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial number (MSN). |
EASA
|
| 2021-05-02R1 | Main Rotor System – Airbus Helicopters | Airbus Helicopters, certificated in any category, as identified in paragraphs (c)(1) through (3) of this AD. (1) Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, and AS350D helicopters. (2) Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. (3) Model EC130B4 and EC130T2 helicopters. |
FAA
|
| 2021-0242 | ATA 53 – Fuselage – Door Stop Fitting Holes at Frame 66/68 – Inspection / Repair | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers, except: – aeroplanes on which Airbus modification (mod) 157039 has been embodied in production; – A319 aeroplanes on which mod 28238, mod 28162 and mod 28342 have been embodied in production; and – A318 aeroplanes on which mod 39195 has been embodied in production, or Airbus Service Bulletin (SB) A320-00-1219 has been embodied in service. |
EASA
|
| 2021-0241 | ATA 57 – Wings – Front Spar Vertical Stringers – Inspection | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers (MSN), except those on which Airbus modification (mod) 160000 (structural reinforcement for A319 and A320 sharklet installation) or mod 155946 was implemented in production. |
EASA
|
| 2021-0229 | ATA 57 – Wings – Outer Flaps and Tabs – Identification/ Inspection (Improper Heat Treatment) / Replacement (Wrong Material) | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers (MSN). |
EASA
|
| 2021-0237-E | ATA 26 – Fire Protection – Engine Fire Handles Snap Wire – Inspection | ATR 42 and ATR 72 aeroplanes |
EASA
|
| 2021-19-19 | Air Transport Association (ATA) of America Code 57, Wings. | This AD applies to The Boeing Company Model 737-9 airplanes, certificated in any category |
FAA
|
| 2021-0236 | ATA 32 – Landing Gear – Landing Gear Sliding Tube – Inspection / Replacement | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2021-0233 | ATA 53 – Fuselage – Bulk Cargo Door Frames – Inspection / Repair | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2021-20-19 | Air Transport Association (ATA) of America Code 28, Fuel | This AD applies to The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes, certificated in any category, having line numbers (L/N) 1 through 1200 inclusive. |
FAA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |