Other State of Design

2022-0026

ATA 25 – Equipment / Furnishing – Galley / Container End Stop – Replacement

Airbus A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-271N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N and A321-253N aeroplanes, all manufacturer serial numbers (MSN), if equipped with an affected galley, as identified by Part Number (P/N) and serial number (s/n) in Table 1 and Table 2 of Appendix 1 of this AD, or as identified by P/N in Tables 3, 4 or 5 of Appendix 1 of this AD.

EASA

2022-02-03

Joint Aircraft System Component (JASC) Code 7260, Turbine Engine Accessory Drive.

This AD applies to CFM International, S.A. CFM56-3 and CFM56-7B model turbofan engines equipped with an accessory gearbox (AGB) assembly

FAA

2022-0025

ATA 32 – Landing Gear – Main and Centre Landing Gear Bogie Pivot Pins – Inspection / Replacement

Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all manufacturer serial numbers (MSN), Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all MSN.

EASA

2022-04-05

Air Transport Association (ATA) of America Code 34, Navigation.

This AD applies to all The Boeing Company airplanes identified in paragraphs (c)(1) and (2) of this AD, certificated in any category. (1) Model 757-200, -200PF, -200CB, and -300 series airplanes. (2) Model 767-200, -300, -300F, -400ER, and -2C series airplanes.

FAA

2022-03-16

Joint Aircraft System Component (JASC) Code 7250, Turbine Section.

This AD applies to General Electric Company (GE) GEnx-1B64, GEnx-1B64/P1, GEnx-1B64/P2, GEnx-1B67, GEnx-1B67/P1, GEnx-1B67/P2, GEnx-1B70, GEnx-1B70/75/P1, GEnx-1B70/75/P2, GEnx-1B70/P1, GEnx-1B70/P2, GEnx-1B70C/P1, GEnx-1B70C/P2, GEnx-1B74/75/P1, GEnx-1B74/75/P2, GEnx-1B76/P2, GEnx-1B76A/P2, GEnx-2B67, GEnx-2B67B, and GEnx-2B67/P model turbofan engines with a compressor discharge pressure (CDP) bolted joint assembled or reassembled with the 11C4525P01 torque fixture or assembled with the 11C4629P01 torque wrench.

FAA

2022-03-15

Joint Aircraft System Component (JASC) Code 2841, Fuel Quantity Indicator.

This AD applies to all serial numbers of the airplane models listed in table 1 to paragraph (c), certificated in any category

FAA

2022-02-04

Joint Aircraft System Component (JASC) Code 2997, Hydraulic Power System Wiring.

This AD applies to Airbus Helicopters Model AS350B, AS350B2, AS350B3, and AS350BA helicopters, certificated in any category, serial numbers 1241, 1525, 1601, 1708, 1825, 1910, 1973, 2056, 2072, 2361, 2394, 3170, 3223, 3479, 3789, 9005, 9010, and 9035.

FAA

2022-0022

ATA 27 – Flight Controls – Aileron Servo Controls – Replacement

Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers.

EASA

2022-03-20

Air Transport Association (ATA) of America Code 34, Navigation.

This AD applies to The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes, certificated in any category.

FAA

2022-0019

ATA 57 – Wings – Front and Rear Spars – Inspection

Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers (MSN).

EASA

2022-0020

ATA 54 – Nacelles / Pylons – Pylon Box Drainage Areas and Hydraulic Connections – Inspection

Airbus A380-841 and A380-842 aeroplanes, all manufacturer serial numbers listed in the Effectivity paragraph of Airbus Service Bulletin (SB) A380-29-8026 or SB A380-29-8035, except aeroplanes on which Airbus modification 74407 has been embodied in production.

EASA

2021-26-06

Joint Aircraft System Component (JASC) Code 7260, Turbine Engine Accessory Drive.

General Electric Company (GE) GE90-76B, GE90-85B, GE90-90B, GE90-94B, GE90-110B1, and GE90-115B model turbofan engines

FAA