Other State of Design

2021-0290

ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section – Amendment

MBB-BK117 D-3 and D-3m helicopters, all serial numbers.

EASA

2021-0289-E

ATA – Rotorcraft Flight Manual / Section 2 and 3 – Amendment

MBB-BK117 C-2, D-2, D3 and D-3m helicopters, all variants, all serial numbers (s/n).

EASA

2021-0291

ATA 52 – Doors – Passenger Door Stop Screw – Inspection

Airbus A350-941 and A350-1041 aeroplanes, all manufacturer serial numbers.

EASA

2021-0285

ATA 27 – Flight Controls – Aileron Servo Controls – Replacement

Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers

EASA

2021-0287

ATA 25 – Equipment / Furnishings – Seat Belt Restraint System – Inspection

MBB-BK117 C-2, D-2 and D-3 helicopters, all serial numbers (s/n), if modified in accordance with EASA STC 10039815 or STC 10055175.

EASA

2015-0226R6 C

ATA 25 – Equipment / Furnishings – Hoist – Test / Replacement

This AD applies to the following helicopters, when equipped with a Goodrich hoist having a Part Number (P/N) as listed in Table 1 of this AD: Leonardo AW109SP, AB139, AW139 and AB412 (all Models) helicopters, all serial numbers (s/n); BTI 212, 214 and 412 helicopters (all Models), all s/n; BTCL 429 and 430 helicopters, all s/n; AH AS 365 N3, AS 332 L2 and EC225 LP helicopters, all s/n; AHD MBB-BK117 C-2, EC135 and EC635 (all Models) helicopters, all s/n; MDHI MD900 helicopters, all s/n; and Sikorsky S-61 (all Models), S-76A, S-76B, S-76C and S-92A helicopters, all s/n

EASA

2021-0284

ATA 73 – Engine Fuel & Control – Electronic Engine Control Software – Update

Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers.

EASA

2021-0280

ATA 36 – Pneumatic – Pylon / Wing Interface Bleed Duct and Fuel Pipe – Inspection

Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers.

EASA

2021-0283-E

ATA 53 – Fuselage – Rear Transmission Bearing Support – Inspection

EC 130 T2 helicopters, all serial numbers on which AH modification 074581 has been embodied in production.

EASA

2021-0281

ATA – Aircraft Flight Manual / Engine Bleed Air System – Amendment ATA 36 – Pneumatic – Engine Bleed Air System – Maintenance Tasks

Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343 and A330-743L aeroplanes, all manufacturer serial numbers.

EASA

2021-19-15

Air Transport Association (ATA) of America Code 25, Equipment/furnishings.

This AD applies to The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 777- 25-0649, Revision 2, dated October 8, 2020.

FAA

2021-0279

ATA 25 – Equipment / Furnishings – Doghouse Placard – Installation

Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers

EASA