Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1090
AD NO.
CF-2023-50R1
SUBJECT
Landing Gear – Nose Landing Gear (NLG) Leg Pivot Axle Cracking
APPLICABILITY
Diamond Aircraft Industries Inc. (Diamond) DA 40, DA 40 D, DA 40 F aeroplane models, all serial numbers.
ISSUED BY
TCCA
AD NO.
2014-0152R2
SUBJECT
ATA 72 – Engine – Intermediate Pressure Compressor Rotor Shaft and Balance Weights – Inspection / Modification
APPLICABILITY
RB211 Trent 553-61, 553A2-61, 556-61, 556A2-61 and 560A2-61 engines, all serial numbers, except those on which modification (mod) 72-H555 has been embodied in production. These engines are known to be installed on, but not limited to, Airbus A340-500 and A340-600 series aeroplanes. RB211 Trent 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17 and 895-17 engines, all serial numbers, except those on which mod 72-G401 has been embodied in production. These engines are known to be installed on, but not limited to, Boeing 777 series aeroplanes. RB211 Trent 970-84, 970B-84, 972-84, 972B-84, 977-84, 977B-84 and 980-84 engines, all serial numbers, except those on which mod 72-H561 has been embodied in production. These engines are known to be installed on, but not limited to, Airbus A380 series aeroplanes.
ISSUED BY
EASA
AD NO.
2023-0209
SUBJECT
ATA 35 – Oxygen – Chemical Oxygen Generators – Replacement
APPLICABILITY
A310-203, A310-221, A310-222, A310-204, A310-203C, A310-322, A310-304, A310-324, A310-308, A310-325, A300 B4-620, A300 B4-601, A300 B4-603, A300 B4-622, A300 C4-620, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R and A300 C4-605R variant F aeroplanes; and Airbus A300 F4-608ST aeroplanes; and A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes; and A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-743L, A330-841 and A330-941 aeroplanes; and A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2023-0206
SUBJECT
ATA – Master Minimum Equipment List – Amendment
APPLICABILITY
A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers; and A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2023-0205
SUBJECT
ATA 57 – Wings – Front Spar Vertical Stringers – Inspection
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232 and A321-271N aeroplanes, all manufacturer serial numbers (MSN), except those on which Airbus modification (mod) 160000 (structural reinforcement for A319 and A320 sharklet installation) or mod 155946 was embodied in production.
ISSUED BY
EASA
AD NO.
AD/GA8/11
SUBJECT
Solenoid (Relay) Box Electrical Bonding
APPLICABILITY
GA8 aircraft – all serial numbers up to and including GA8-20-262. GA8-TC 320 aircraft – all serial numbers up to and including GA8-TC 320-20-261.
ISSUED BY
CASA Australia
AD NO.
2023–22–03
SUBJECT
Joint Aircraft Service Component (JASC) Code 7250, Turbine section.
APPLICABILITY
This AD applies to Safran Helicopter Engines, S.A. (type certificate previously held by Turbomeca,S.A.) Model Arriel 2D and Arriel 2E engines.
ISSUED BY
FAA
AD NO.
2023-0201
SUBJECT
ATA 72 – Engine – Low Pressure Compressor Blades – Inspection / Replacement
APPLICABILITY
Trent 1000 engines, models Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G and Trent 1000-H engines, all engine serial numbers (ESN); and Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all ESN. These engines are known to be installed on, but not limited to, Boeing 787 aeroplanes.
ISSUED BY
EASA
AD NO.
2013-0251-CN
SUBJECT
ATA 57 – CANCELLED: Flight Controls – Spoiler Servo Control / Hydraulic Locking Function – Operational Test
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all Manufacturer Serial Numbers (MSN). Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-643 and A340-642 aeroplanes, all MSN.
ISSUED BY
EASA
AD NO.
2023-0200
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Amendment
APPLICABILITY
Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2023-0199
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Amendment
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2023-0198
SUBJECT
ATA 57 – Wings – Wing Front and Rear Spars – Inspection
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers (MSN).
ISSUED BY
EASA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| CF-2023-50R1 | Landing Gear – Nose Landing Gear (NLG) Leg Pivot Axle Cracking | Diamond Aircraft Industries Inc. (Diamond) DA 40, DA 40 D, DA 40 F aeroplane models, all serial numbers. |
TCCA
|
| 2014-0152R2 | ATA 72 – Engine – Intermediate Pressure Compressor Rotor Shaft and Balance Weights – Inspection / Modification | RB211 Trent 553-61, 553A2-61, 556-61, 556A2-61 and 560A2-61 engines, all serial numbers, except those on which modification (mod) 72-H555 has been embodied in production. These engines are known to be installed on, but not limited to, Airbus A340-500 and A340-600 series aeroplanes. RB211 Trent 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17 and 895-17 engines, all serial numbers, except those on which mod 72-G401 has been embodied in production. These engines are known to be installed on, but not limited to, Boeing 777 series aeroplanes. RB211 Trent 970-84, 970B-84, 972-84, 972B-84, 977-84, 977B-84 and 980-84 engines, all serial numbers, except those on which mod 72-H561 has been embodied in production. These engines are known to be installed on, but not limited to, Airbus A380 series aeroplanes. |
EASA
|
| 2023-0209 | ATA 35 – Oxygen – Chemical Oxygen Generators – Replacement | A310-203, A310-221, A310-222, A310-204, A310-203C, A310-322, A310-304, A310-324, A310-308, A310-325, A300 B4-620, A300 B4-601, A300 B4-603, A300 B4-622, A300 C4-620, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R and A300 C4-605R variant F aeroplanes; and Airbus A300 F4-608ST aeroplanes; and A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes; and A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-743L, A330-841 and A330-941 aeroplanes; and A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2023-0206 | ATA – Master Minimum Equipment List – Amendment | A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers; and A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2023-0205 | ATA 57 – Wings – Front Spar Vertical Stringers – Inspection | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232 and A321-271N aeroplanes, all manufacturer serial numbers (MSN), except those on which Airbus modification (mod) 160000 (structural reinforcement for A319 and A320 sharklet installation) or mod 155946 was embodied in production. |
EASA
|
| AD/GA8/11 | Solenoid (Relay) Box Electrical Bonding | GA8 aircraft – all serial numbers up to and including GA8-20-262. GA8-TC 320 aircraft – all serial numbers up to and including GA8-TC 320-20-261. |
CASA Australia
|
| 2023–22–03 | Joint Aircraft Service Component (JASC) Code 7250, Turbine section. | This AD applies to Safran Helicopter Engines, S.A. (type certificate previously held by Turbomeca,S.A.) Model Arriel 2D and Arriel 2E engines. |
FAA
|
| 2023-0201 | ATA 72 – Engine – Low Pressure Compressor Blades – Inspection / Replacement | Trent 1000 engines, models Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G and Trent 1000-H engines, all engine serial numbers (ESN); and Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all ESN. These engines are known to be installed on, but not limited to, Boeing 787 aeroplanes. |
EASA
|
| 2013-0251-CN | ATA 57 – CANCELLED: Flight Controls – Spoiler Servo Control / Hydraulic Locking Function – Operational Test | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all Manufacturer Serial Numbers (MSN). Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-643 and A340-642 aeroplanes, all MSN. |
EASA
|
| 2023-0200 | ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Amendment | Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2023-0199 | ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 3 – Certification Maintenance Requirements – Amendment | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers. |
EASA
|
| 2023-0198 | ATA 57 – Wings – Wing Front and Rear Spars – Inspection | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers (MSN). |
EASA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |