Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1090
AD NO.
2020-0191R1
SUBJECT
ATA 25 – Equipment / Furnishings – Forward Facing Central Seat(s) – Removal
APPLICABILITY
AB139 and AW139 helicopters, serial number (s/n) 31400 to 31882 inclusive, and s/n 41300 to 41570 inclusive, if a passenger cabin floor is installed, composed of three panels, and having the first row central seat(s) facing forward, except those on which Leonardo Service Bulletin (SB) 139-678 has been embodied in service.
ISSUED BY
EASA
AD NO.
2022-15-02
SUBJECT
Joint Aircraft System Component (JASC) Code 7100, Powerplant System.
APPLICABILITY
(1) This AD applies to hot air balloons, certificated in any category, with a Cameron Balloons Ltd. Stratus double burner assembly part number (P/N) CB8720 or P/N CB8721 installed. (2) The affected burner assemblies may be installed on hot air balloon models including, but not limited to, those of the following design approval holders: (i) Aerostar International, Inc.; (ii) Ballonbau Worner GmbH; (iii) Balóny Kubíček spol. s.r.o.; (iv) Cameron Balloons Ltd.; (v) Eagle Balloons Corp.; (vi) JR Aerosports, Ltd (type certificate previously held by Sundance Balloons (US)); (vii) Lindstrand Balloons Ltd.; and (viii) Michael D. McGrath (type certificate subsequently transferred to Andrew Philip Richardson, Adams Aerostats LLC).
ISSUED BY
FAA
AD NO.
2022-15-01
SUBJECT
Air Transport Association (ATA) of America Code 55, Stabilizers.
APPLICABILITY
This AD applies to The Boeing Company Model 787-8, 787-9, and 787-10 airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin B787-81205-SB550010-00 RB, Issue 001, dated May 24, 2021.
ISSUED BY
FAA
AD NO.
2022-0150
SUBJECT
ATA 64 – Tail Rotor – Blades – Inspection
APPLICABILITY
EC 130 B4 and EC 130 T2 helicopters, all serial numbers (s/n).
ISSUED BY
EASA
AD NO.
2022-0149
SUBJECT
ATA – Pilot’s Operating Handbook – Emergency Procedures – Amendment ATA 25 – Equipment / Furnishings – Emergency Exit Door Panel – Modification
APPLICABILITY
TBM 700 aeroplanes serial numbers (S/N) 434 to 1424 inclusive, except S/N 1408 and S/N 1420.
ISSUED BY
EASA
AD NO.
2022-15-04
SUBJECT
Joint Aircraft System Component (JASC) Code 7250, Turbine Section.
APPLICABILITY
This AD applies to CFM International, S.A. (CFM) LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, LEAP-1A35A model turbofan engines with engine serial number (ESN) 598-280, 598-283, 598-284, 598-291, 598-300, 598-302, 598-327, 598-572, 598-629, 598-646, 598-648, 598-659, 598-667, 598-812, 598-862, 598-909, and 599-192.
ISSUED BY
FAA
AD NO.
2022-0009R1
SUBJECT
ATA 72 – Engine – High Pressure Turbine Rotor Stage 1 Blade – Inspection
APPLICABILITY
LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2 and LEAP-1A35A engines, all serial numbers.
ISSUED BY
EASA
AD NO.
TCD-8201C-1-2022-E
SUBJECT
To prevent injury to persons on the ground or a hoisting accident due to the overload clutch failure of the hoist.
APPLICABILITY
Kawasaki BK117 series helicopters equipped with a Goodrich rescue hoist assembly having a Part Number (P/N) as listed in Table 2.1 of this AD.
ISSUED BY
JCAB
AD NO.
2021-0163-CN
SUBJECT
ATA 28 / 79 – CANCELLED: Fuel / Oil – Check Valves – Inspection / Replacement
APPLICABILITY
212, 412 and 412EP helicopters, all serial numbers (s/n).
ISSUED BY
EASA
AD NO.
2022-0143
SUBJECT
ATA 42 – Integrated Modular Avionics – Ethernet Network – Inspection
APPLICABILITY
AHD EC135 P3H, EC135 T3H, EC635 P3H and EC635 T3H helicopters, all serial numbers (s/n); AHD MBB-BK117 D-2, MBB-BK117 D-3 and MBB-BK117 D-3m helicopters, all variants, all s/n; AH EC 175 B helicopters, all s/n; and AH H160-B helicopters, all s/n.
ISSUED BY
EASA
AD NO.
2022-0139
SUBJECT
ATA 72 – Engine – High Pressure Turbine Nozzle Assembly and Stator Stationary Seal – Inspection
APPLICABILITY
LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2 and LEAP-1A35A engines, serial numbers (s/n) 598-280, 598-283, 598-284, 598-291, 598-300, 598-302, 598-327, 598-572, 598-629, 598-646, 598-648, 598-659, 598-667, 598-812, 598-862, 598-909 and 599-192.
ISSUED BY
EASA
AD NO.
2022-0134
SUBJECT
ATA 61 – Propeller – Blade Lag Screws – Replacement
APPLICABILITY
MTV-5, MTV-9, MTV-12, MTV-14, MTV-15, MTV-16, MTV-18 and MTV-27 variable pitch propellers, all models, having a serial number (s/n) as mentioned in the ASB, as defined in this AD; and MTV-5, MTV-9, MTV-11, MTV-12, MTV-14, MTV-15, MTV-16, MTV-17, MTV-18, MTV-20 and MTV27 variable pitch propellers, any model, on which a propeller blade is installed, having an s/n as mentioned in the ASB, as defined in this AD.
ISSUED BY
EASA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| 2020-0191R1 | ATA 25 – Equipment / Furnishings – Forward Facing Central Seat(s) – Removal | AB139 and AW139 helicopters, serial number (s/n) 31400 to 31882 inclusive, and s/n 41300 to 41570 inclusive, if a passenger cabin floor is installed, composed of three panels, and having the first row central seat(s) facing forward, except those on which Leonardo Service Bulletin (SB) 139-678 has been embodied in service. |
EASA
|
| 2022-15-02 | Joint Aircraft System Component (JASC) Code 7100, Powerplant System. | (1) This AD applies to hot air balloons, certificated in any category, with a Cameron Balloons Ltd. Stratus double burner assembly part number (P/N) CB8720 or P/N CB8721 installed. (2) The affected burner assemblies may be installed on hot air balloon models including, but not limited to, those of the following design approval holders: (i) Aerostar International, Inc.; (ii) Ballonbau Worner GmbH; (iii) Balóny Kubíček spol. s.r.o.; (iv) Cameron Balloons Ltd.; (v) Eagle Balloons Corp.; (vi) JR Aerosports, Ltd (type certificate previously held by Sundance Balloons (US)); (vii) Lindstrand Balloons Ltd.; and (viii) Michael D. McGrath (type certificate subsequently transferred to Andrew Philip Richardson, Adams Aerostats LLC). |
FAA
|
| 2022-15-01 | Air Transport Association (ATA) of America Code 55, Stabilizers. | This AD applies to The Boeing Company Model 787-8, 787-9, and 787-10 airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin B787-81205-SB550010-00 RB, Issue 001, dated May 24, 2021. |
FAA
|
| 2022-0150 | ATA 64 – Tail Rotor – Blades – Inspection | EC 130 B4 and EC 130 T2 helicopters, all serial numbers (s/n). |
EASA
|
| 2022-0149 | ATA – Pilot’s Operating Handbook – Emergency Procedures – Amendment ATA 25 – Equipment / Furnishings – Emergency Exit Door Panel – Modification | TBM 700 aeroplanes serial numbers (S/N) 434 to 1424 inclusive, except S/N 1408 and S/N 1420. |
EASA
|
| 2022-15-04 | Joint Aircraft System Component (JASC) Code 7250, Turbine Section. | This AD applies to CFM International, S.A. (CFM) LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, LEAP-1A35A model turbofan engines with engine serial number (ESN) 598-280, 598-283, 598-284, 598-291, 598-300, 598-302, 598-327, 598-572, 598-629, 598-646, 598-648, 598-659, 598-667, 598-812, 598-862, 598-909, and 599-192. |
FAA
|
| 2022-0009R1 | ATA 72 – Engine – High Pressure Turbine Rotor Stage 1 Blade – Inspection | LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2 and LEAP-1A35A engines, all serial numbers. |
EASA
|
| TCD-8201C-1-2022-E | To prevent injury to persons on the ground or a hoisting accident due to the overload clutch failure of the hoist. | Kawasaki BK117 series helicopters equipped with a Goodrich rescue hoist assembly having a Part Number (P/N) as listed in Table 2.1 of this AD. |
JCAB
|
| 2021-0163-CN | ATA 28 / 79 – CANCELLED: Fuel / Oil – Check Valves – Inspection / Replacement | 212, 412 and 412EP helicopters, all serial numbers (s/n). |
EASA
|
| 2022-0143 | ATA 42 – Integrated Modular Avionics – Ethernet Network – Inspection | AHD EC135 P3H, EC135 T3H, EC635 P3H and EC635 T3H helicopters, all serial numbers (s/n); AHD MBB-BK117 D-2, MBB-BK117 D-3 and MBB-BK117 D-3m helicopters, all variants, all s/n; AH EC 175 B helicopters, all s/n; and AH H160-B helicopters, all s/n. |
EASA
|
| 2022-0139 | ATA 72 – Engine – High Pressure Turbine Nozzle Assembly and Stator Stationary Seal – Inspection | LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2 and LEAP-1A35A engines, serial numbers (s/n) 598-280, 598-283, 598-284, 598-291, 598-300, 598-302, 598-327, 598-572, 598-629, 598-646, 598-648, 598-659, 598-667, 598-812, 598-862, 598-909 and 599-192. |
EASA
|
| 2022-0134 | ATA 61 – Propeller – Blade Lag Screws – Replacement | MTV-5, MTV-9, MTV-12, MTV-14, MTV-15, MTV-16, MTV-18 and MTV-27 variable pitch propellers, all models, having a serial number (s/n) as mentioned in the ASB, as defined in this AD; and MTV-5, MTV-9, MTV-11, MTV-12, MTV-14, MTV-15, MTV-16, MTV-17, MTV-18, MTV-20 and MTV27 variable pitch propellers, any model, on which a propeller blade is installed, having an s/n as mentioned in the ASB, as defined in this AD. |
EASA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |