Other State of Design

Airworthiness Directives (ADs) are issued to address unsafe conditions.

Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39. 

Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.

The list of all active ADs is provided in the following Table.

Total : 249
AD NO.
2024-0023
SUBJECT
ATA 25 – Equipment/Furnishings – Galley 4 Aft Bulkhead Cover Panel – Replacement
APPLICABILITY
A330-243, A330-302, A330-343 and A330-941 aeroplanes, manufacturer serial numbers (MSN) 1627, 1628, 1637, 1679, 1691, 1692, 1701, 1716, 1720, 1721, 1745, 1754, 1757, 1769, 1779, 1783, 1792, 1872, 1878, 1915, 1920, 1931, 1935, 1949, 1953, 1957, 1962, 1983, 1990, 1991, 1994, 1999, 2000 and 2010.
ISSUED BY
EASA
AD NO.
2024-0022
SUBJECT
ATA 32 – Landing Gear – Nose Landing Gear – Repair Assessment
APPLICABILITY
Airbus A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024–01–11
SUBJECT
Joint Aircraft System Component (JASC) Code: 2500, Cabin Equipment/Furnishings.
APPLICABILITY
This AD applies to all helicopters, certified in any category, with a restraint system with a Pacific Scientific Company rotary buckle assembly(buckle) part number (P/N) 1111475 (all dash numbers) or P/N 1111548–01 installed having a date of manufacture between January 2012 andSeptember 2012 inclusive or an unknown date of manufacture. These buckles may be installed on, but not limited to, Airbus Helicoptersmodel helicopters, certificated in any category.
ISSUED BY
FAA
AD NO.
2024-0020
SUBJECT
ATA 31 – Indicating and Recording Systems – Flight Warning Computer Software – Modification
APPLICABILITY
Airbus A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024–02–51
SUBJECT
Air Transport Association (ATA) of America Code 52, Doors.
APPLICABILITY
This AD applies to The Boeing Company Model 737–9 airplanes, certificated in any category, with a mid cabin door plug installed.
ISSUED BY
FAA
AD NO.
CF-2024-02
SUBJECT
Stabilizers – Horizontal Stabilizer – Incorrect Torque Specified for Attachment Bolts
APPLICABILITY
Diamond Aircraft Industries Inc. model DA 62 aeroplanes, serial numbers 62.C001 through 62.C044 and 62.008 through 62.203.
ISSUED BY
TCCA
AD NO.
2024-0016
SUBJECT
ATA 27 – Flight Controls – Trimmable Horizontal Stabilizer Actuator / Electric Load Sensing Device – Modification
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, and A330-941 aeroplanes, all manufacturer serial numbers (MSN) up to MSN 1919 inclusive, except MSN 1915; and Airbus A340-211, A340-212, A340-213, A340-311, A340-312 and A340-313 aeroplanes, all MSN.
ISSUED BY
EASA
AD NO.
2024-0014
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – System Equipment Maintenance Requirements – ALS Part 4 – Amendment
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024-0013
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Safe Life Airworthiness Limitations Items – ALS Part 1 – Amendment
APPLICABILITY
Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024-0012
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment
APPLICABILITY
Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024-0011
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
ISSUED BY
EASA
AD NO.
2024-02-51 Emergency
SUBJECT
Air Transport Association (ATA) of America Code 52, Doors.
APPLICABILITY
This AD applies to The Boeing Company Model 737-9 airplanes, certificated in any category, with a mid cabin door plug installed.
ISSUED BY
FAA
AD NO. SUBJECT APPLICABILITY ISSUED BY
2024-0023 ATA 25 – Equipment/Furnishings – Galley 4 Aft Bulkhead Cover Panel – Replacement A330-243, A330-302, A330-343 and A330-941 aeroplanes, manufacturer serial numbers (MSN) 1627, 1628, 1637, 1679, 1691, 1692, 1701, 1716, 1720, 1721, 1745, 1754, 1757, 1769, 1779, 1783, 1792, 1872, 1878, 1915, 1920, 1931, 1935, 1949, 1953, 1957, 1962, 1983, 1990, 1991, 1994, 1999, 2000 and 2010.
EASA
2024-0022 ATA 32 – Landing Gear – Nose Landing Gear – Repair Assessment Airbus A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers.
EASA
2024–01–11 Joint Aircraft System Component (JASC) Code: 2500, Cabin Equipment/Furnishings. This AD applies to all helicopters, certified in any category, with a restraint system with a Pacific Scientific Company rotary buckle assembly(buckle) part number (P/N) 1111475 (all dash numbers) or P/N 1111548–01 installed having a date of manufacture between January 2012 andSeptember 2012 inclusive or an unknown date of manufacture. These buckles may be installed on, but not limited to, Airbus Helicoptersmodel helicopters, certificated in any category.
FAA
2024-0020 ATA 31 – Indicating and Recording Systems – Flight Warning Computer Software – Modification Airbus A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
EASA
2024–02–51 Air Transport Association (ATA) of America Code 52, Doors. This AD applies to The Boeing Company Model 737–9 airplanes, certificated in any category, with a mid cabin door plug installed.
FAA
CF-2024-02 Stabilizers – Horizontal Stabilizer – Incorrect Torque Specified for Attachment Bolts Diamond Aircraft Industries Inc. model DA 62 aeroplanes, serial numbers 62.C001 through 62.C044 and 62.008 through 62.203.
TCCA
2024-0016 ATA 27 – Flight Controls – Trimmable Horizontal Stabilizer Actuator / Electric Load Sensing Device – Modification Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, and A330-941 aeroplanes, all manufacturer serial numbers (MSN) up to MSN 1919 inclusive, except MSN 1915; and Airbus A340-211, A340-212, A340-213, A340-311, A340-312 and A340-313 aeroplanes, all MSN.
EASA
2024-0014 ATA 05 – Time Limits / Maintenance Checks – System Equipment Maintenance Requirements – ALS Part 4 – Amendment Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
EASA
2024-0013 ATA 05 – Time Limits / Maintenance Checks – Safe Life Airworthiness Limitations Items – ALS Part 1 – Amendment Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
EASA
2024-0012 ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers.
EASA
2024-0011 ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers.
EASA
2024-02-51 Emergency Air Transport Association (ATA) of America Code 52, Doors. This AD applies to The Boeing Company Model 737-9 airplanes, certificated in any category, with a mid cabin door plug installed.
FAA

Contact

NoEnquiry TopicEmail Point of Contact
1Aircraft Registration and De-Registration[email protected]
2Certification of Design and Production of Aircraft (DOA/POA), including:
– Aircraft Modification and Repair Approval
– Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation
– Aircraft Noise Certificate
[email protected]
3Certification of Airworthiness for Air Operator Certificate (AOC) Holders[email protected]
4Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft)[email protected]
5Certification of Approved Maintenance Organisation (AMO)[email protected]
6Any Other Matters Not Covered Above[email protected]

เลือกภาษา

ขนาดตัวอักษร
การแสดงผล