Other State of Design
Airworthiness Directives (ADs) are issued to address unsafe conditions.
Aircraft on the Thai Register are required to comply with applicable ADs in accordance with Requirement of The Civil Aviation Authority of Thailand No.89 attach with TCAR AIR Part-39.
Additionally, Airworthiness Directive (AD) issued by CAAT for products, parts and appliances where Thailand are either state of register or state of design or state of design of modification in accordance with Air Navigation Act (BE 2497) Section 41/82 are required to be complied.
The list of all active ADs is provided in the following Table.
Total : 1090
AD NO.
2023-02-12
SUBJECT
Joint Aircraft System Component (JASC) Code 7160, Engine Air Intake System.
APPLICABILITY
This AD applies to Continental Aerospace Technologies, Inc. (Continental) GTSIO-520, IO-470, IO-520, IO-550, IOF-550, LIO-470, LIO-520, LTSIO-520, O-470, TSIO-470, TSIO-520, TSIO-550, TSIOF-550, and TSIOL-550 model reciprocating engines listed in the Application Table, page 1, of Superior Air Parts, Inc. (SAP) Mandatory Service Bulletin MSB22-01 A, dated December 16, 2022 (SAP MSB22-01 A) with an installed: (1) SAP cylinder assembly having a part number (P/N) and serial number listed in Table 1 of SAP MSB22- 01 A, installed on or after January 20, 2022; or (2) Cylinder assembly that was repaired and installed on or after January 20, 2022, with a SAP intake valve having P/N SA539988 and lot number 19077 O; or (3) SAP intake valve with P/N SA539988 and lot number 19077 O.
ISSUED BY
FAA
AD NO.
2023-0029
SUBJECT
ATA 25 – Equipment / Furnishings – Galley / Container End Stop – Replacement
APPLICABILITY
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-252N, A321-253N, A321-271N and A321-272N aeroplanes, all manufacturer serial numbers (MSN), if equipped with an affected galley (as defined in this AD) or if equipped with a galley that has been identified as an affected galley (Part Number and/or serial number, as applicable) in the Aircraft Inspection Report (AIR).
ISSUED BY
EASA
AD NO.
2023-0028
SUBJECT
ATA 53 – Fuselage – Rear Transmission Bearing Support – Inspection
APPLICABILITY
EC 130 T2 helicopters, all serial numbers on which AH modification 074581 has been embodied in production.
ISSUED BY
EASA
AD NO.
2023-0027
SUBJECT
ATA 72 – Engine – Low Pressure Turbine Stage 1 Blades – Inspection
APPLICABILITY
Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all serial numbers.
ISSUED BY
EASA
AD NO.
2023-0026
SUBJECT
ATA 54 – Nacelles / Pylons – Pylons Rib 1 – Inspection
APPLICABILITY
Airbus A350-941 and A350-1041 aeroplanes, manufacturer serial numbers as listed in the SBs, as defined in this AD.
ISSUED BY
EASA
AD NO.
2023-0024
SUBJECT
ATA 53 – Fuselage – Frame 99 to 104 Shear Ties and Mouse Holes – Inspection
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2023-0023
SUBJECT
ATA 32 – Landing Gear – Nose Landing Gear Sliding Tubes – Replacement
APPLICABILITY
Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2023-02-02
SUBJECT
Joint Aircraft System Component (JASC) Code 3200, Landing Gear System
APPLICABILITY
This AD applies to Gulfstream Aerospace Corporation Model GV and GV-SP airplanes, all serialnumbers, certificated in any category
ISSUED BY
FAA
AD NO.
2023-0018
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 4 / System Equipment Maintenance Requirements – Amendment
APPLICABILITY
Airbus A310-203, A310-203C, A310-204, A310-221, A310-222, A310-304, A310-308, A310-322, A310-324 and A310-325 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2023-0019-CN
SUBJECT
ATA 24 – CANCELLED: Electrical Power System – ARTUS Transfo-Rectifier – Replacement
APPLICABILITY
Airbus A320-111 and A320-211 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2023-0016
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment
APPLICABILITY
Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
AD NO.
2023-0015
SUBJECT
ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment
APPLICABILITY
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all manufacturer serial numbers
ISSUED BY
EASA
| AD NO. | SUBJECT | APPLICABILITY | ISSUED BY |
|---|---|---|---|
| 2023-02-12 | Joint Aircraft System Component (JASC) Code 7160, Engine Air Intake System. | This AD applies to Continental Aerospace Technologies, Inc. (Continental) GTSIO-520, IO-470, IO-520, IO-550, IOF-550, LIO-470, LIO-520, LTSIO-520, O-470, TSIO-470, TSIO-520, TSIO-550, TSIOF-550, and TSIOL-550 model reciprocating engines listed in the Application Table, page 1, of Superior Air Parts, Inc. (SAP) Mandatory Service Bulletin MSB22-01 A, dated December 16, 2022 (SAP MSB22-01 A) with an installed: (1) SAP cylinder assembly having a part number (P/N) and serial number listed in Table 1 of SAP MSB22- 01 A, installed on or after January 20, 2022; or (2) Cylinder assembly that was repaired and installed on or after January 20, 2022, with a SAP intake valve having P/N SA539988 and lot number 19077 O; or (3) SAP intake valve with P/N SA539988 and lot number 19077 O. |
FAA
|
| 2023-0029 | ATA 25 – Equipment / Furnishings – Galley / Container End Stop – Replacement | Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-252N, A321-253N, A321-271N and A321-272N aeroplanes, all manufacturer serial numbers (MSN), if equipped with an affected galley (as defined in this AD) or if equipped with a galley that has been identified as an affected galley (Part Number and/or serial number, as applicable) in the Aircraft Inspection Report (AIR). |
EASA
|
| 2023-0028 | ATA 53 – Fuselage – Rear Transmission Bearing Support – Inspection | EC 130 T2 helicopters, all serial numbers on which AH modification 074581 has been embodied in production. |
EASA
|
| 2023-0027 | ATA 72 – Engine – Low Pressure Turbine Stage 1 Blades – Inspection | Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2 and Trent 1000-L2 engines, all serial numbers. |
EASA
|
| 2023-0026 | ATA 54 – Nacelles / Pylons – Pylons Rib 1 – Inspection | Airbus A350-941 and A350-1041 aeroplanes, manufacturer serial numbers as listed in the SBs, as defined in this AD. |
EASA
|
| 2023-0024 | ATA 53 – Fuselage – Frame 99 to 104 Shear Ties and Mouse Holes – Inspection | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2023-0023 | ATA 32 – Landing Gear – Nose Landing Gear Sliding Tubes – Replacement | Airbus A380-841, A380-842 and A380-861 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2023-02-02 | Joint Aircraft System Component (JASC) Code 3200, Landing Gear System | This AD applies to Gulfstream Aerospace Corporation Model GV and GV-SP airplanes, all serialnumbers, certificated in any category |
FAA
|
| 2023-0018 | ATA 05 – Time Limits / Maintenance Checks – Airworthiness Limitations Section Part 4 / System Equipment Maintenance Requirements – Amendment | Airbus A310-203, A310-203C, A310-204, A310-221, A310-222, A310-304, A310-308, A310-322, A310-324 and A310-325 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2023-0019-CN | ATA 24 – CANCELLED: Electrical Power System – ARTUS Transfo-Rectifier – Replacement | Airbus A320-111 and A320-211 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2023-0016 | ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment | Airbus A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642 and A340-643 aeroplanes, all manufacturer serial numbers |
EASA
|
| 2023-0015 | ATA 05 – Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items – ALS Part 2 – Amendment | Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342 and A330-343 aeroplanes, all manufacturer serial numbers |
EASA
|
Contact
| No | Enquiry Topic | Email Point of Contact |
|---|---|---|
| 1 | Aircraft Registration and De-Registration | [email protected] |
| 2 | Certification of Design and Production of Aircraft (DOA/POA), including: – Aircraft Modification and Repair Approval – Aircraft Type Certificate (TC) / Supplemental Type – Certificate (STC) Validation – Aircraft Noise Certificate | [email protected] |
| 3 | Certification of Airworthiness for Air Operator Certificate (AOC) Holders | [email protected] |
| 4 | Certification of Airworthiness for Non-Air Operator Certificate (Non-AOC) Holders (I.E. GA Aircraft) | [email protected] |
| 5 | Certification of Approved Maintenance Organisation (AMO) | [email protected] |
| 6 | Any Other Matters Not Covered Above | [email protected] |